China Industrial double acting pneumatic actuator suppliers and manufacturers, factory

Product Description

Features

Operating media: Dry or lubricated air, the non-corrosive gases or oil.

Air supply pressure Double acting: 2-8Bar.

Application:Either indoor or outdoor

Highest pressure:The maximum input pressure is 8 Bar.

Surface material: Hard anodized.

1. Rack & Pinion design.

The Rack & pinion and the two pistons are designed in symmetric structure to perform stably and rapidly with high accuracy and high power output.

2. Aluminum Body.

The extruded cylinder body of AOX-P series industrial double acting pneumatic actuator is made of high quality stainless steel with fine machined socket and hard anodized outer surface to prolong the service life and lower the coefficient of friction.

3. Integrated design.

Integrated design of AOX-P series industrial double acting pneumatic actuator is adopted. All type of single acting actuators and double acting actuators are provided with same cylinder body and end cap. The acting module could be easily changed by installing or demounting springs.

Relevany data about the actuator

Type	Max. Pressure	Rotate Angle	Operating Temperature	Stoke adjustment Per1°laps	Diameter φ（mm）	Ayr Volume(L)		Moving time(sec)(A)
						Opening	Closing	Opening	Closing
DR/SC00015	Dry or Lubricating Clean Comperssed Air 8bar	90°±4° or Full Stroke 0°~90°	ST(standard)NBR O-ring-20 to +80 HT(high Temperature)FPM 0-ring-15 to +150 Lt(low Temperature)Silicon 0-ring-40 to +80	1/6	50	0.1	0.2	DR 0.2	DR 0.3
								SC 0.3	SC 0.3
DR/SC00030				1/6	63	0.2	0.3	DR 0.3	DR 0.3
								SC 0.3	SC 0.4
DR/SC00060				1/5	75	0.3	0.5	DR 0.3	DR 0.4
								SC 0.4	SC 0.5
DR/SC00100				1/5	88	0.5	0.8	DR 0.4	DR 0.5
								SC 0.5	SC 0.6
DR/SC00150				1/5	100	0.7	1.1	DR 0.5	DR 0.6
								SC 0.7	SC 0.9
DR/SC00220				1/5	115	1.2	1.8	DR 0.7	DR 0.8
								SC 0.9	SC 1.1
DR/SC00300				1/4	125	1.5	2.3	DR 0.9	DR 1.1
								SC 1.2	SC 1.4
DR/SC00450				1/4	145	2.4	3.8	DR 1.2	DR 1.4
								SC 1.5	SC 1.8
DR/SC00600				1/4	160	3.1	4.9	DR 1.5	DR 1.7
								SC 1.8	SC 2.1
DR/SC00900				1/4	180	4.3	6.9	DR 2.0	DR 2.2
								SC 2.4	SC 2.8
DR/SC01200				1/4	200	5.9	9.5	DR 2.7	DR 3.2
								SC 3.5	SC 4.0
DR/SC02000				1/4	240	10.0	15.2	DR 3.5	DR 4.0
								SC 4.1	SC 4.6
DR/SC03000				1/4	265	14.5	21.4	DR 4.0	DR 4.5
								SC 4.5	SC 5.0
DR/SC05000				1/4	330	25.0	40.0	DR 6.0	DR 7.0
								SC 7.5	SC 8.5

Performance Data (Double Acting)

Type	2.5Bar	3.0Bar	3.5Bar	4.0Bar	4.5Bar	5.0Bar	5.5Bar	6.0Bar	7.0Bar	8.0Bar
DR00006
DR00015	8.3	10	11.6	13.3	15	16.6	18.3	19.9	23.3	26.6
DR00030	14.7	17.6	20.5	23.5	26.4	29.3	32.2	35.2	41	46.9
DR00060	29.1	34.9	40.7	46.5	52.3	58.2	64	69.8	81.4	93
DR00100	45.7	54.9	64	73.2	82.3	91.5	101	110	128	146
DR00150	66.5	79.7	93	106	120	133	146	160	186	213
DR00220	107	129	150	172	193	215	236	258	301	344
DR00300	138	166	191	221	249	277	304	332	387	443
DR00450	217	261	304	348	391	434	478	521	608	695
DR00600	283	340	397	453	510	567	623	680	793	907
DR00900	383	459	536	612	689	765	842	918	1071	1224
DR01200	531	638	744	850	956	1063	1169	1275	1488	1700
DR02000	935	1122	1309	1496	1683	1870	2057	2244	2618	2992
DR03000	1347	1617	1886	2156	2425	2695	2964	3234	3772	4311
DR05000	2350	2821	3291	3761	4231	4701	5171	5641	6581	7521
DR10000

Bill of Materials

Operation Mechanism (Double Acting)

The air source pressure comes into the body of industrial double acting pneumatic actuator between the two pistons from air entrance (2) and pushes the pistons toward the end of the cylinder body. The air between the pistons and the ends of the cylinder body is released from air entrance (4). Meanwhile the racks of pistons rotate the output shaft anticlockwise (gear wheel) simultaneously, whereas if the air source pressure comes into the ends of the cylinder body from air entrance (4) and pushes the pistons toward each other with the air between two pistons released from air entrance (2), the output shaft (gear wheel) would be driven by the racks of the pistons simultaneously to rotate clockwise. (if the pistons are assembled in different direction from each other, the output shaft would turn out to rotate in inverse direction, namely the double acting reverse DLtype)

Our Advantages

1. We have a complete product quality inspection system to ensure that our AOX-P series industrial double acting pneumatic actuator meet the requirements at every manufacturing stage.

2. We have a standardized quality control system. Each AOX-P series industrial double acting pneumatic actuator will undergo product testing before leaving the factory. We have almost no customer complaints in 3 years.

3. We participate in various exhibitions all over the world. In the Valve World、Achema、Asia Water、PCVEXPO、ECWATECH、INDOWATER , you can all come to us.

FAQ

We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.

Q: Are you manufactory or trade company?

A :We are the Manufactory specialized in actuator for more than 20 years, in Ruian, Zhejiang province, China.

Q: If I'm interested in your AOX-P series industrial double acting pneumatic actuator when I can receive your quotation and detail information after send the inquiry?

A:All your inquiry will be replied in 24hours.

Q:Can I get a sample before the order because I really don't how is your AOX-P series industrial double acting pneumatic actuator quality?

A:Of course! We also think sample order is the best way to build the trust.

Inspection Equipment