AOX-P series high speed double acting pneumatic rotary actuator are applied to butterfly valves, ball valves, dampers or rotary machines.We provide AOX-P series high speed double acting pneumatic rotary actuator for buildings, plants, steelworks, powerplants,etc. AOX executing agencies are available to more than 30 countries. We are committed to producing high-quality executing actuators at lower economic prices for the benefit of our customers. We are committed to providing our distributors and customers with the best service.
Fully compliance with all the latest international standards
Wide range options in technical specification and highly cost-effective
Innovations and patented solutions for a universal drive shaft
Innovations and patented solutions for a universal drive shaft
Operating media: Dry or lubricated air, the non-corrosive gases or oil.
Air supply pressure Double acting: 2-8Bar;
Lowtemperature : -40°C + 80°C
High temperature:-20°C-+ 150°C
Highest pressure:The maximum input pressure is 8 Bar
Surface material: Hard anodized.
1. Rack & Pinion design.
The Rack & pinion and the two pistons are designed in symmetric structure to perform stably and rapidly with high accuracy and high power output.
2. Fastener for AOX-P series high speed double acting pneumatic rotary actuator.
All the fasteners are made of stainless steel to be resistant to corrosion for a long time.
3. Bottom mounting standard
The pontes of AOX-P series high speed double acting pneumatic rotary actuator are built in according to latest version of ISO5211,DIN3337(F03-F25) to guarantee the interchangeability and versatility of the products.
4. A single compact design utilizing identical body and end caps for both double acting and spring return models. This feature reduces inventory and allows field conversion, by adding or removing modular spring cartridges.
Type |
2.5Bar |
3.0Bar |
3.5Bar |
4.0Bar |
4.5Bar |
5.0Bar |
5.5Bar |
6.0Bar |
7.0Bar |
8.0Bar |
DR00006 |
|
|
|
|
|
|
|
|
|
|
DR00015 |
8.3 |
10 |
11.6 |
13.3 |
15 |
16.6 |
18.3 |
19.9 |
23.3 |
26.6 |
DR00030 |
14.7 |
17.6 |
20.5 |
23.5 |
26.4 |
29.3 |
32.2 |
35.2 |
41 |
46.9 |
DR00060 |
29.1 |
34.9 |
40.7 |
46.5 |
52.3 |
58.2 |
64 |
69.8 |
81.4 |
93 |
DR00100 |
45.7 |
54.9 |
64 |
73.2 |
82.3 |
91.5 |
101 |
110 |
128 |
146 |
DR00150 |
66.5 |
79.7 |
93 |
106 |
120 |
133 |
146 |
160 |
186 |
213 |
DR00220 |
107 |
129 |
150 |
172 |
193 |
215 |
236 |
258 |
301 |
344 |
DR00300 |
138 |
166 |
191 |
221 |
249 |
277 |
304 |
332 |
387 |
443 |
DR00450 |
217 |
261 |
304 |
348 |
391 |
434 |
478 |
521 |
608 |
695 |
DR00600 |
283 |
340 |
397 |
453 |
510 |
567 |
623 |
680 |
793 |
907 |
DR00900 |
383 |
459 |
536 |
612 |
689 |
765 |
842 |
918 |
1071 |
1224 |
DR01200 |
531 |
638 |
744 |
850 |
956 |
1063 |
1169 |
1275 |
1488 |
1700 |
DR02000 |
935 |
1122 |
1309 |
1496 |
1683 |
1870 |
2057 |
2244 |
2618 |
2992 |
DR03000 |
1347 |
1617 |
1886 |
2156 |
2425 |
2695 |
2964 |
3234 |
3772 |
4311 |
DR05000 |
2350 |
2821 |
3291 |
3761 |
4231 |
4701 |
5171 |
5641 |
6581 |
7521 |
DR10000 |
|
|
|
|
|
|
|
|
|
|
Type |
Max. Pressure |
Rotate Angle |
Operating Temperature |
Stoke adjustment Per1°laps |
Diameter φ(mm) |
Ayr Volume(L) |
Moving time(sec)(A) |
||
Opening |
Closing |
Opening |
Closing |
||||||
DR/SC00015 |
Dry or Lubricating Clean Comperssed Air 8bar |
90°±4° or Full Stroke 0°~90° |
ST(standard)NBR O-ring-20 to +80 HT(high Temperature)FPM 0-ring-15 to +150 Lt(low Temperature)Silicon 0-ring-40 to +80 |
1/6 |
50 |
0.1 |
0.2 |
DR 0.2 |
DR 0.3 |
SC 0.3 |
SC 0.3 |
||||||||
DR/SC00030 |
1/6 |
63 |
0.2 |
0.3 |
DR 0.3 |
DR 0.3 |
|||
SC 0.3 |
SC 0.4 |
||||||||
DR/SC00060 |
1/5 |
75 |
0.3 |
0.5 |
DR 0.3 |
DR 0.4 |
|||
SC 0.4 |
SC 0.5 |
||||||||
DR/SC00100 |
1/5 |
88 |
0.5 |
0.8 |
DR 0.4 |
DR 0.5 |
|||
SC 0.5 |
SC 0.6 |
||||||||
DR/SC00150 |
1/5 |
100 |
0.7 |
1.1 |
DR 0.5 |
DR 0.6 |
|||
SC 0.7 |
SC 0.9 |
||||||||
DR/SC00220 |
1/5 |
115 |
1.2 |
1.8 |
DR 0.7 |
DR 0.8 |
|||
SC 0.9 |
SC 1.1 |
||||||||
DR/SC00300 |
1/4 |
125 |
1.5 |
2.3 |
DR 0.9 |
DR 1.1 |
|||
SC 1.2 |
SC 1.4 |
||||||||
DR/SC00450 |
1/4 |
145 |
2.4 |
3.8 |
DR 1.2 |
DR 1.4 |
|||
SC 1.5 |
SC 1.8 |
||||||||
DR/SC00600 |
1/4 |
160 |
3.1 |
4.9 |
DR 1.5 |
DR 1.7 |
|||
SC 1.8 |
SC 2.1 |
||||||||
DR/SC00900 |
1/4 |
180 |
4.3 |
6.9 |
DR 2.0 |
DR 2.2 |
|||
SC 2.4 |
SC 2.8 |
||||||||
DR/SC01200 |
1/4 |
200 |
5.9 |
9.5 |
DR 2.7 |
DR 3.2 |
|||
SC 3.5 |
SC 4.0 |
||||||||
DR/SC02000 |
1/4 |
240 |
10.0 |
15.2 |
DR 3.5 |
DR 4.0 |
|||
SC 4.1 |
SC 4.6 |
||||||||
DR/SC03000 |
1/4 |
265 |
14.5 |
21.4 |
DR 4.0 |
DR 4.5 |
|||
SC 4.5 |
SC 5.0 |
||||||||
DR/SC05000 |
1/4 |
330 |
25.0 |
40.0 |
DR 6.0 |
DR 7.0 |
|||
SC 7.5 |
SC 8.5 |
1. We have a complete product quality inspection system to ensure that our AOX-P series industrial double acting pneumatic rotary actuator meet the requirements at every manufacturing stage.
2. We have a standardized quality control system. Each AOX-P series industrial double acting pneumatic rotary actuator will undergo product testing before leaving the factory. We have almost no customer complaints in 3 years.
3. Fast delivery, accept small orders, order response quickly, simple operation process, focus on timeliness, can be quickly shipped through UPS, DHL, TNT, customers can also choose to ship by sea, air and other methods.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: Are you manufactory or trade company?
A :We are the Manufactory specialized in actuator for more than 20 years, in Ruian, Zhejiang province, China.
Q:Can you send me more detail information anout the AOX-P series high speed double acting pneumatic rotary actuator?
A:Yes,you can send me mail about your inquiry and I’ll send you he detal information you need.
Q:What is the minimum quantity of an order for your AOX-P series high speed double acting pneumatic rotary actuator?
A:We don't have the request for the minimum order value.So you can buy even one piece from us.