AOX-P series small double acting pneumatic rotary actuator are applied to butterfly valves, ball valves, dampers or rotary machines.AOX has 23 years of accumulation in the field of fluid control industry.According to the different inquiey of the market, we have developed a series of small double acting pneumatic rotary actuator. And our good reputation is gained by the reliability and stability performance in the field of valve fluid control.
Higher performance and reliability
Innovations and patented solutions for a universal drive shaft
Fully compliance with all the latest international standards
Operating media:Dry or lubricated air, the non-corrosive gases or oil.
Openrating temperature:Standard:-20°C +80°C
Lowtemperature: -40°C + 80°C
High temperature:-20°C + 150°C
Highest pressure:The maximum input pressure is 8 Bar
Surface material: Hard anodized
ACCESSORIES AVAILABLE
• Limit switch boxes
• Proximity switches
• Gear boxes
• Positioners
1. Aluminum Body for AOX-P series small double acting pneumatic rotary actuator .
The extruded cylinder body is made of high quality stainless steel with fine machined socket and hard anodized outer surface to prolong the service life and lower the coefficient of friction.
2. Travel Stops.
The two sole adjusting screws at the side surface of AOX-P series small double acting pneumatic rotary actuator which has been already installed on the valve could make the adjustment of location of the valve opening and closing more convenient and accurate.
3. Indicator.
Multifunctional location indicator, in field visible indicator and standard socket in accordance to VDI/VDE3845、NAMUR could be installed and export all the accessories .
Type |
2.5Bar |
3.0Bar |
3.5Bar |
4.0Bar |
4.5Bar |
5.0Bar |
5.5Bar |
6.0Bar |
7.0Bar |
8.0Bar |
DR00006 |
|
|
|
|
|
|
|
|
|
|
DR00015 |
8.3 |
10 |
11.6 |
13.3 |
15 |
16.6 |
18.3 |
19.9 |
23.3 |
26.6 |
DR00030 |
14.7 |
17.6 |
20.5 |
23.5 |
26.4 |
29.3 |
32.2 |
35.2 |
41 |
46.9 |
DR00060 |
29.1 |
34.9 |
40.7 |
46.5 |
52.3 |
58.2 |
64 |
69.8 |
81.4 |
93 |
DR00100 |
45.7 |
54.9 |
64 |
73.2 |
82.3 |
91.5 |
101 |
110 |
128 |
146 |
DR00150 |
66.5 |
79.7 |
93 |
106 |
120 |
133 |
146 |
160 |
186 |
213 |
DR00220 |
107 |
129 |
150 |
172 |
193 |
215 |
236 |
258 |
301 |
344 |
DR00300 |
138 |
166 |
191 |
221 |
249 |
277 |
304 |
332 |
387 |
443 |
DR00450 |
217 |
261 |
304 |
348 |
391 |
434 |
478 |
521 |
608 |
695 |
DR00600 |
283 |
340 |
397 |
453 |
510 |
567 |
623 |
680 |
793 |
907 |
DR00900 |
383 |
459 |
536 |
612 |
689 |
765 |
842 |
918 |
1071 |
1224 |
DR01200 |
531 |
638 |
744 |
850 |
956 |
1063 |
1169 |
1275 |
1488 |
1700 |
DR02000 |
935 |
1122 |
1309 |
1496 |
1683 |
1870 |
2057 |
2244 |
2618 |
2992 |
DR03000 |
1347 |
1617 |
1886 |
2156 |
2425 |
2695 |
2964 |
3234 |
3772 |
4311 |
DR05000 |
2350 |
2821 |
3291 |
3761 |
4231 |
4701 |
5171 |
5641 |
6581 |
7521 |
DR10000 |
|
|
|
|
|
|
|
|
|
|
Type |
Max. Pressure |
Rotate Angle |
Operating Temperature |
Stoke adjustment Per1°laps |
Diameter φ(mm) |
Ayr Volume(L) |
Moving time(sec)(A) |
||
Opening |
Closing |
Opening |
Closing |
||||||
DR/SC00015 |
Dry or Lubricating Clean Comperssed Air 8bar |
90°±4° or Full Stroke 0°~90° |
ST(standard)NBR O-ring-20 to +80 HT(high Temperature)FPM 0-ring-15 to +150 Lt(low Temperature)Silicon 0-ring-40 to +80 |
1/6 |
50 |
0.1 |
0.2 |
DR 0.2 |
DR 0.3 |
SC 0.3 |
SC 0.3 |
||||||||
DR/SC00030 |
1/6 |
63 |
0.2 |
0.3 |
DR 0.3 |
DR 0.3 |
|||
SC 0.3 |
SC 0.4 |
||||||||
DR/SC00060 |
1/5 |
75 |
0.3 |
0.5 |
DR 0.3 |
DR 0.4 |
|||
SC 0.4 |
SC 0.5 |
||||||||
DR/SC00100 |
1/5 |
88 |
0.5 |
0.8 |
DR 0.4 |
DR 0.5 |
|||
SC 0.5 |
SC 0.6 |
||||||||
DR/SC00150 |
1/5 |
100 |
0.7 |
1.1 |
DR 0.5 |
DR 0.6 |
|||
SC 0.7 |
SC 0.9 |
||||||||
DR/SC00220 |
1/5 |
115 |
1.2 |
1.8 |
DR 0.7 |
DR 0.8 |
|||
SC 0.9 |
SC 1.1 |
||||||||
DR/SC00300 |
1/4 |
125 |
1.5 |
2.3 |
DR 0.9 |
DR 1.1 |
|||
SC 1.2 |
SC 1.4 |
||||||||
DR/SC00450 |
1/4 |
145 |
2.4 |
3.8 |
DR 1.2 |
DR 1.4 |
|||
SC 1.5 |
SC 1.8 |
||||||||
DR/SC00600 |
1/4 |
160 |
3.1 |
4.9 |
DR 1.5 |
DR 1.7 |
|||
SC 1.8 |
SC 2.1 |
||||||||
DR/SC00900 |
1/4 |
180 |
4.3 |
6.9 |
DR 2.0 |
DR 2.2 |
|||
SC 2.4 |
SC 2.8 |
||||||||
DR/SC01200 |
1/4 |
200 |
5.9 |
9.5 |
DR 2.7 |
DR 3.2 |
|||
SC 3.5 |
SC 4.0 |
||||||||
DR/SC02000 |
1/4 |
240 |
10.0 |
15.2 |
DR 3.5 |
DR 4.0 |
|||
SC 4.1 |
SC 4.6 |
||||||||
DR/SC03000 |
1/4 |
265 |
14.5 |
21.4 |
DR 4.0 |
DR 4.5 |
|||
SC 4.5 |
SC 5.0 |
||||||||
DR/SC05000 |
1/4 |
330 |
25.0 |
40.0 |
DR 6.0 |
DR 7.0 |
|||
SC 7.5 |
SC 8.5 |
1. We have a complete product quality inspection system to ensure that our AOX-P series small double acting pneumatic rotary actuator meet the requirements at every manufacturing stage.
2. We are an informationization company,We have OA system, ERP system, CRM system, that can help us to management, control quality of AOX-P series small double acting pneumatic rotary actuator.
3. We have a rapid after-sales response mechanism. When we receive customer feedback on after-sales issues, we will arrange technology to find problems and quickly provide solutions.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: How long can I expect to get the sample of AOX-P series small double acting pneumatic rotary actuator?
A :The samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days.
Q: How can order the products without any acknowledge of import ?
A :We could arrange you shipping or air or express for you and deliver everything to your port or provide you door to door service.
Q. The question about payment or other question about AOX-P series small double acting pneumatic rotary actuator:
A :Pls email me or chat with me directly.
QQ: 2864920739 E-mail: zjaox09@zjaox.com
Skype: Peter Zjaox