AOX-L series motor operated linear actuator is specially designed for linear operating valves such as globe valve and similar usages.AOX's AOX-L series motor operated linear actuator serve all over the world, including Europe, the Americas, ICAO, Australia, Africa, Asia, the Middle East and Southeast Asian countries. It is widely used in water treatment, heating, petroleum, chemical industry, electronics, light industry, food, medicine, textile, paper making, hydropower, ships, smelting, new energy and other fields. In addition, it has established very friendly relations with many Fortune 500 companies.
Running speeds: 1.5 mm/s
Anti-vibration level:JB/T 8219
Noise level:Less than 75 dB within 1 m
Ingress Protection:2* NPT 3/4
Electrical interface:IP67, Optional:IP68
On/off type signal:
Input : AC 110/220 Input
Signal Feedback:Integrated fault contacts,Close the valve contact,Open the valve contact
Modulating type signal:
Input signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V
Output signal: 4 - 20 mA; 0 - 10 V; 2 - 10 V
Loss Signal Mode Setting:N/A
Space heater with thermostat to prevent overheating
Provide a wide range of voltage
Strong structure, accurate positioning, reliable performance
Hand/auto clutch switching
Local control/auto hold
Modular design
Mechanical interlock protection
Contact mode selection
Conditional control protection
1. Terminal block for AOX-L series motor operated linear actuator
Installed in a separate wiring chamber, using the spring self - type terminal ensure robust and reliable.
2. Cam and limit switch
Tightened with two specific nuts above, each cam can be set separately, once the setup is complete, each cam will always remain in this position.
3. Manual operation for AOX-L series motor operated linear actuator
With hand, automatic clutch function. The valve can be operated manually in case of power failure. Automatic discharge hand wheel meshing capabilities to ensure the safety of personnel at the moment of motor rates.
Model |
Thrust |
Speed |
Max travel |
power |
Rated current(A) |
Weight |
N |
mm/S |
mm |
W |
220V/50HZ/1PH |
Kg |
|
AOX-L-30 |
3000 |
1.5 |
25 |
30 |
0.31 |
17.5 |
AOX-L-50 |
5000 |
1.5 |
40 |
45 |
0.42 |
19 |
AOX-L-80 |
8000 |
1.5 |
60 |
60 |
0.62 |
19.5 |
AOX-L-100 |
10000 |
1.5 |
100 |
60 |
0.68 |
33 |
AOX-L-160 |
16000 |
1.5 |
100 |
90 |
0.85 |
33 |
AOX-L-200 |
20000 |
1.5 |
100 |
90 |
0.87 |
33 |
AOX-L-250 |
25000 |
1.5 |
100 |
120 |
1.22 |
33 |
AOX-L-300 |
30000 |
1.5 |
100 |
120 |
1.28 |
33 |
Shell |
Enclosure :IP67,NEMA4 and 6 |
|
|
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz |
|
Motor |
Asynchronous motor |
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
Fail safe/ |
Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ |
|
Indicator |
Continuous position indicator |
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Mechanical limit |
2 × external adjustable stopper |
|
Space heater |
30W(110V/220VAC) |
|
Conduit entry |
2 × M18*1.5 |
|
Ambient temperature |
-30℃~+70℃ |
|
Lubrication |
Grease moly(EP type) |
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
Ambient humidity |
Max 90%RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.2~34 Hz,30 minutes |
No. |
Option scheme |
Remark |
1 |
Potentiometer unit(1K-10K) |
AOX-L series |
2 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-L series |
3 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-L series |
4 |
Water-proof actuator (IP68,10M,250HR) |
AOX-L series |
5 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-L series |
6 |
Electric current position sensor (output 4-20mA DC) |
AOX-L series |
7 |
High temperature resistance actuator (-10℃~+100℃) |
AOX-L series |
8 |
Low temperature resistance actuator (-40℃~+70℃) |
AOX-L series |
9 |
Low speed actuator |
AOX-L series |
10 |
Bus Control Unit |
AOX-L series |
Our company has a complete and strict external supplier management system. In order to standardize the management of the supply channels of our company, purchased parts and external suppliers, establish a safe and stable supplier team to control the quality of our AOX-L series motor operated linear actuator.
Since 1997, the company has set up a technology R&D center, invested a lot of resources in R&D innovation, introduced high-tech talents, cooperation between colleges and research institutes, advanced equipment introduction, etc. With the value placed on domestically developed products and respect for intellectual property, R&D team of AOX has totally obtained 96 national patents. To maintain our status as leader of this industry. we will continue to focus on innovation and implement highest quality standards and lead the high quality AOX-L series motor operated linear actuator.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q: About the sample what is the cost of transportation?
A :The freight depends on weight, packding size and your country or province region, etc.
Q: What payment methods your company accept?
A: We accept most of the payment methods,but maily accept T/T,L/C,Western Union.
Q:which countries are your AOX-L series motor operated linear actuator sold to?
A:Our products are exported to Europe, American, Southeast Asia, Russia and Africa, and spread over more than 30 countries and regions in the world.