AOX-L series industrial linear electric actuator is a new generation of linear actuator,It uses modular design, with rich scalability features for a variety of valves and similar products.AOX-L series industrial linear electric actuator can be drived by 380V/220V/110VAC or 24V/110VDC power, inputs 4-20mA or 0-10VDC control signal, moves valve to the right position, and achieves to automatic control, the maximum force is 30000N.We are committed to providing our distributors and customers with the best service.
Motor specification: Class F, with thermal protector up to 135°C
Force range:3000 - 30000 N
Anti-vibration level:JB/T 8219
Noise level:Less than 75 dB within 1 m
Ingress Protection:2* NPT 3/4
Electrical interface:IP67, Optional:IP68
Applicable Voltage:
Single phase: Voltage (±10 %); Hz (±5 %)
50 Hz (24, 220, 230, 240 Volts)
60 Hz (24, 110, 120, 220, 230, 240 Volts)
3 phase: Voltage (±10 %); Hz (±5 %)
50 Hz (220, 240, 380, 400, 460, 500, 525, 550 Volts)
60 Hz (208, 220, 230, 240, 380, 440, 460, 480, 575,600 Volts)
DC : 24 V (±10 %)
Provide a wide range of voltage
Strong structure, accurate positioning, reliable performance
Absolute encoder
Remote control setting
Self-diagnosis fault alarm
Conditional control protection
1. Valve position detecting mechanism
Through direct connection of rack on the output shaft and two sets of gears control mechanism to detect real-time valve positionand fully open fully closed position independently. It will maximum improve the accuracy and security.
2. Scale table for AOX-L series industrial linear electric actuator
The scale table is installed on the guide rod, which is more intuitive and convenient to observe.
3. Intelligent module
AOX-L series industrial linear electric actuator using highly integrated, low-power microcontroller and analog circuit mixed control panel, using all-metal plug-in installation, it can effectively isolate the actuator motor heat and control board, greatly improve the software and hardware anti-jamming performance and temperature resistance.
Model |
Thrust |
Speed |
Max travel |
power |
Rated current(A) |
Weight |
N |
mm/S |
mm |
W |
220V/50HZ/1PH |
Kg |
|
AOX-L-30 |
3000 |
1.5 |
25 |
30 |
0.31 |
17.5 |
AOX-L-50 |
5000 |
1.5 |
40 |
45 |
0.42 |
19 |
AOX-L-80 |
8000 |
1.5 |
60 |
60 |
0.62 |
19.5 |
AOX-L-100 |
10000 |
1.5 |
100 |
60 |
0.68 |
33 |
AOX-L-160 |
16000 |
1.5 |
100 |
90 |
0.85 |
33 |
AOX-L-200 |
20000 |
1.5 |
100 |
90 |
0.87 |
33 |
AOX-L-250 |
25000 |
1.5 |
100 |
120 |
1.22 |
33 |
AOX-L-300 |
30000 |
1.5 |
100 |
120 |
1.28 |
33 |
Shell |
Enclosure :IP67,NEMA4 and 6 |
|
|
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz |
|
Motor |
Asynchronous motor |
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
|
Fail safe/ |
Internal-placed thermal protection, Open 115℃ ±5℃/Close 97℃ ± 5℃ |
|
Indicator |
Continuous position indicator |
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Mechanical limit |
2 × external adjustable stopper |
|
Space heater |
30W(110V/220VAC) |
|
Conduit entry |
2 × M18*1.5 |
|
Ambient temperature |
-30℃~+70℃ |
|
Lubrication |
Grease moly(EP type) |
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
Ambient humidity |
Max 90%RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.2~34 Hz,30 minutes |
No. |
Option scheme |
Remark |
1 |
Potentiometer unit(1K-10K) |
AOX-L series |
2 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-L series |
3 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-L series |
4 |
Water-proof actuator (IP68,10M,250HR) |
AOX-L series |
5 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-L series |
6 |
Electric current position sensor (output 4-20mA DC) |
AOX-L series |
7 |
High temperature resistance actuator (-10℃~+100℃) |
AOX-L series |
8 |
Low temperature resistance actuator (-40℃~+70℃) |
AOX-L series |
9 |
Low speed actuator |
AOX-L series |
10 |
Bus Control Unit |
AOX-L series |
AOX believes that only a solid software and hardware foundation can achieve long-term and stable development. We have established some advanced computer aided systems, such as product design, resource management, production management and so on. A precision machining platform with CNC machining center as the core is established. We will continue to establish and improve a documented management system to produce more reailable products for all our customers.If you are interested in our AOX-L series industrial linear electric actuator,please contact me by E-mail zjaox09@zjaox.com.
In order to better display the company's AOX-L series industrial linear electric actuator and enhance the company's popularity, our company actively participates in major exhibitions at home and abroad, in Germany VALVE WORLD, AHEMA, Russia PCV Expo, ECWATCH, Malaysia ASIA WATER, Thailand THAIWATER, Indonesia Indowater, Shanghai Flowtech, etc.You all can see us at these exhibitions.
Q: Are you manufactory or trade company?
A :We are the Manufactory specialized in AOX-L series industrial linear electric actuator for more than 20 years, in Ruian, Zhejiang province, China.
Q: What's your business scope?
A: Our business scope is electric actuatir,pneumatic actuator,limit switch, etc.
Q: What is your main market for AOX-L series industrial linear electric actuator?
A:North America,South America,Africa,Southeast Assia,and Europe.