Product Description

Features

Multifunction position indicator
Compact housing design, suitable for any application and working environment
Wide range options in technical specification and highly cost-effective
Air supply pressure:Double acting: 2-8Bar;Spring return: 2-8Bar
Travel adjustment:Have adjustment range of ±4° for the rotation at 90°
Highest pressure:The maximum input pressure is 8 Bar
Surface material: Hard anodized
ACCESSORIES AVAILABLE
• Centering rings for all sizes
• Brackets
• Limit switch boxes
• Proximity switches
• Positioners

1. Spring for AOX-P series small single acting pneumatic rotary actuator.
Combined preload security group spring could be mounted or increased/decreased easily and safely during assembling or during in field usage.
2. Bottom mounting standard
The pontes of AOX-P series small single acting pneumatic rotary actuator are built in according to latest version of ISO5211,DIN3337(F03-F25) to guarantee the interchangeability and versatility of the products.
3. Extruded aluminum body with both internal and external corrosion protections having a honed cylinder surface for longer life and a lower coefficient of friction.
4. Modular preloaded spring cartridges designed with coated springs for simple range versatility, greater safety and corrosion resistance.

Relevany data about the actuator

Type	Max. Pressure	Rotate Angle	Operating Temperature	Stoke adjustment Per1°laps	Diameter φ（mm）	Ayr Volume(L)		Moving time(sec)(A)
						Opening	Closing	Opening	Closing
DR/SC00015	Dry or Lubricating Clean Comperssed Air 8bar	90°±4° or Full Stroke 0°~90°	ST(standard)NBR O-ring-20 to +80 HT(high Temperature)FPM 0-ring-15 to +150 Lt(low Temperature)Silicon 0-ring-40 to +80	1/6	50	0.1	0.2	DR 0.2	DR 0.3
								SC 0.3	SC 0.3
DR/SC00030				1/6	63	0.2	0.3	DR 0.3	DR 0.3
								SC 0.3	SC 0.4
DR/SC00060				1/5	75	0.3	0.5	DR 0.3	DR 0.4
								SC 0.4	SC 0.5
DR/SC00100				1/5	88	0.5	0.8	DR 0.4	DR 0.5
								SC 0.5	SC 0.6
DR/SC00150				1/5	100	0.7	1.1	DR 0.5	DR 0.6
								SC 0.7	SC 0.9
DR/SC00220				1/5	115	1.2	1.8	DR 0.7	DR 0.8
								SC 0.9	SC 1.1
DR/SC00300				1/4	125	1.5	2.3	DR 0.9	DR 1.1
								SC 1.2	SC 1.4
DR/SC00450				1/4	145	2.4	3.8	DR 1.2	DR 1.4
								SC 1.5	SC 1.8
DR/SC00600				1/4	160	3.1	4.9	DR 1.5	DR 1.7
								SC 1.8	SC 2.1
DR/SC00900				1/4	180	4.3	6.9	DR 2.0	DR 2.2
								SC 2.4	SC 2.8
DR/SC01200				1/4	200	5.9	9.5	DR 2.7	DR 3.2
								SC 3.5	SC 4.0
DR/SC02000				1/4	240	10.0	15.2	DR 3.5	DR 4.0
								SC 4.1	SC 4.6
DR/SC03000				1/4	265	14.5	21.4	DR 4.0	DR 4.5
								SC 4.5	SC 5.0
DR/SC05000				1/4	330	25.0	40.0	DR 6.0	DR 7.0
								SC 7.5	SC 8.5

Bill of Materials

Performance Data (Single Acting)

Operation Mechanism (Single Acting)

The air source pressure comes into the body of AOX-P series small single acting pneumatic rotary actuator between the two pistons from air entrance (2) and pushes the pistons toward the end of the cylinder body while the springs at each ends inside the cylinder body is forced to shrink with the air between the pistons and the ends of the cylinder body released from air entrance (4).in the meantime, the racks of pistons drive the output shaft (gear wheel) simultaneously to rotate anticlockwise. After the direction of the air source pressure is reversed by the solenoid valve, the springs at each end begin to reset and the pistons are forced toward each other by the elasticity with the air between two pistons released from air entrance (2). Meanwhile the output shaft (gear wheel) would be driven by the racks of the pistons simultaneously to rotate clockwise. (if the pistons are assembled in different direction from each other, the output shaft would turn out to rotate in inverse direction when the springs reset, namely the single acting reverse SO type)

Our Advantages

1. We are manufacture for more than 20 years. Our company was founded in 1997,We are specialize in R&D, designing, and producing of AOX-P series small single acting pneumatic rotary actuator.

2. We have a complete product quality inspection system to ensure that our AOX-P series small single acting pneumatic rotary actuator meet the requirements at every manufacturing stage.

3. We have a standardized quality control system. Each actuator will undergo product testing before leaving the factory. We have almost no customer complaints in 3 years.

FAQ

We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.

Q : How long is the sample time of the slipper?
A :The regular AOX-P series small single acting pneumatic rotary actuator we all have in stock, if it is specially customized it takes about 3-5 days.

Q: Are you manufactory or trade company?
A :We are the Manufactory specialized in actuator for more than 20 years, in Ruian, Zhejiang province, China.

Q: How long can I expect to get the sample of AOX-P series small single acting pneumatic rotary actuator?
A :The samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days.

Our Company