AOX-R series small quarter turn electric actuator is newly designed to operate small size ball valve,butterfly valve,plug/damper valves and automation of rotary machines.The compact design of the small quarter turn electric actuator and the rugged, firm corrosion-resistant housing will be your best choice.AOX has 23 years of accumulation in the field of fluid control industry.We expect to cooperate with you in the near future..
Torque range:30~5000N.m
Switching time:20~200 S
Ambient temperature:-20℃~+70℃
Control method:On-off / modulating type/ Intelligent type
Weight:2.1 KGS~68 KGS
Protection:IP67, (IP68 optional)
Voltage:AC110~265V , AC / DC 24V Multi voltage input
Single phase: AC220V / AC110V / AC24V / DC24V
Applicable valve : Ball Valve (DN15-DN200); Butterfly Valve (DN25-DN400)
Material of Actuator Body: Aluminium Alloy
1. Compact design:Small, light and compact design, high torque and various control option will meet your specific requirement.
2. Firm corrosion-resistant housing: The shell is made of aluminum alloy, with anodic oxidation treatment and polyester powder coating. It is strong corrosion-resistant and enclosure IP67,NEMA 4 and 6, IP68 is optional.
3. Wide torque range:The torque of AOX-R small quarter turn electric actuator is form 30Nm-5000Nm.
4. Circuit:Controlling circuit meets the single-phase or three-phase power supply standard, circuit layout is reasonable and compact, terminals meet various of additional functional requirements effectively.
The shell of our actuator is hardened by high temperature, which makes the matrix more stable. After machining, the surface is oxidized and sprayed, and the surface has strong corrosion resistance. The AOX-R small quarter turn electric actuator is the upgraded appearance of our company, the appearance is more exquisite and practical.
Our modulating module adopts external installation, and the bare board heats up better. AOX-R small quarter turn electric actuator solves the contradiction that the maximum temperature of the actuator is 120 °C and the electronic element temperature of the module is only 70 °C.
Model |
Max output torque |
Operating Time 90° |
Drive shaft(mm) |
Power |
Rated current(A) |
Weight |
|
N·M |
( 90°) |
Square |
Deep |
(W) |
220VAC/1ph |
(kg) |
|
AOX-R-003 |
30 |
20 |
11×11 |
15.5 |
8 |
0.25 |
2.1 |
AOX-R-005 |
50 |
30 |
14×14 |
18 |
10 |
0.24 |
3.6 |
AOX-R-008 |
80 |
30 |
14×14 |
18 |
10 |
0.26 |
3.6 |
AOX-R-010 |
100 |
30 |
17×17 |
22.5 |
15 |
0.40 |
4.6 |
AOX-R-015 |
150 |
40 |
17×17 |
22.5 |
15 |
0.42 |
4.6 |
AOX-R-020 |
200 |
30 |
22×22 |
26 |
60 |
0.28 |
13 |
AOX-R-030 |
300 |
30 |
22×22 |
26 |
60 |
0.32 |
13.4 |
AOX-R-040 |
400 |
30 |
22×22 |
26 |
60 |
0.34 |
13.8 |
AOX-R-060 |
600 |
40 |
27×27 |
32.5 |
60 |
0.35 |
14 |
AOX-R-080 |
800 |
40 |
27×27 |
32.5 |
90 |
0.56 |
14.3 |
AOX-R-100 |
1000 |
40 |
27×27 |
32.5 |
90 |
0.59 |
14.5 |
AOX-R-160 |
1600 |
60 |
Max Φ40 |
65 |
90 |
0.60 |
68 |
AOX-R-200 |
2000 |
60 |
Max Φ40 |
65 |
90 |
0.62 |
68 |
AOX-R-300 |
3000 |
120 |
Max Φ40 |
65 |
90 |
0.64 |
68 |
AOX-R-400 |
4000 |
200 |
Max Φ40 |
65 |
90 |
0.66 |
68 |
AOX-R-500 |
5000 |
200 |
Max Φ40 |
65 |
90 |
0.67 |
68 |
Shell |
Aluminum alloy Shell, Enclosure:IP67,IP68 is optional |
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
Controlling power |
110/220VAC/1ph,50/60 Hz, ±10% |
|
Motor |
Squirrel-cage asynchronous motor |
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Travel |
90°~270°±10°(Please specify in advance if over 90°) |
0°~270° |
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
Indicator |
Continuous situation indication |
|
Manual operation |
Mechanical handle(Handwheel is optional ) |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Mechanical limit |
2 x external adjustable stopper |
|
Space heater |
30W (110/220VAC) Anti-condensation |
|
Conduit entries |
2 Pieces M18*1.5(AOX-R-003 except) |
|
Ambient temperature |
-25℃~+70℃(-30℃、-40℃、-60℃ optional) |
|
Lubrication |
Grease moly(EP type) |
|
Material |
Steel, Aluminum alloy, Aluminum bronze, Polycarbonate |
|
Ambient humidity |
Max 90% RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
External coating |
Dry powder, Epoxy polyester |
No. |
Option scheme |
Remark |
1 |
Heater |
AOX-R Series |
2 |
Water-proof actuator(IP68,10M,250HR) |
AOX-R Series |
3 |
Potentionmeter unit(1k-10k) |
Exceot AOX-R-003 |
4 |
Proportion control unit(Control signal 4-20mA DC/1-5V/10V) |
AOX-R Series |
5 |
Local control units (Local control open/stop/close optional switch, local/remote switch) |
Exceot AOX-R-003 |
6 |
Travel 120°, 180°,270° |
AOX-R Series |
7 |
Direct current motor(24VDC) |
AOX-R Series |
8 |
Electric current position sensor (Output 4-20mA DC) |
Exceot AOX-R-003 |
9 |
Self-reset when power failure |
AOX-R Series |
10 |
Quick opening(2.8s,5s,10s,15s) |
AOX-R Series |
Zhejiang Aoxiang Automation Technology Co., Ltd. (formerly known as Rui'an Changhong Automation Instrument Co., Ltd.) was founded on April 7, 1997. Later, it was changed to Zhejiang Aoxiang Automation Technology Co., Ltd. due to the registered capital of the merger application. The company is located at No. 2608, Development road, Economic Development Zone, Ruian City. It covers an area of 12,300 square meters, with a construction area of 16,200 square meters. The production plant area is 12,600 square meters. It is only 20 kilometers away from Wenzhou Airport and Wenzhou Railway Station. The traffic is convenient. The company is a high-tech enterprise specializing in the production of electric actuators for nearly 20 years, integrating design, research and development, production, sales, after-sales service and training.The annual production capacity is more than 60,000 units. The products are widely used in petroleum and chemical industry. , water treatment, shipbuilding, paper, power stations, light industry and other fields.If you are interested in our small quarter turn electric electric actuator, welcome to contact us by Email-zjaox09@zjaox.com.
Our company has been engaged in the manufacture of electric actuators for more than 20 years. It has mature manufacturing technology and perfect production equipment, with an annual production capacity of 60,000 electric actuators. The main processing equipment includes machining center, CNC lathe, CNC milling machine, CNC drilling machine, CNC drilling machine, plasma spray welding equipment, spray drying line and other equipment, milling, boring, drilling, throwing, grinding and other types of machine tools More than 300 sets of equipment, equipment are purchased from well-known domestic companies, high production efficiency, high processing accuracy.
Our company invested a large amount of funds in technology development for technology research and development and new product development. There are 89 patents in total, including 3 invention patents, 27 utility model patents, 49 design patents, and 4 invention patents. 2 utility model patents.
Our company has obtained various domestic and foreign certifications such as IS09001, ISO14001, CE, ATEX, GOST, EAC, SIL3, IP68, CU-TR, explosion-proof, etc., which fully demonstrates that our products fully comply with international standards, and the quality of products is guaranteed.
Q:How's the warranty period for your actuator?
A:We offer one year warranty for our small quarter turn electric actuator.
Q: About the sample what is the cost of transportation?
A :The freight depends on weight, packding size and your country or province region, etc.
Q:How long can I expect to get the sample?
A :If you want to order the sample of small quarter turn electric actuator,the samples will be ready for delivery in 3-5 days The samples will be sent va international express such as DHL ,UPS ,TNT, FEDEX and would be arrived within 3-5 days