AOX-M series remote control motorized multi turn actuator is specially designed for all multi turn valve applications (linear motion valves)such as globe valve, gate valve, and etc.Since its launch, AOX-M series remote control motorized multi turn actuator has been continuously enhanced and improved on its quality as well as its features through continuous development by our R&D department.
Torque Range: 40 - 1000 Nm Direct Output
Corrosion level: Epoxy powder coating NEMA 4X corrosion protection is optional.
Explosion-proof level: Exd IIC T5 design
Motor specification: Class F, with thermal protector up to 135°C
Electrical interface: 2* NPT 3/4 , 1* NPT1 1/2
Time Lag:N/A
Other Function:
Torque protection
Motor overheat protection
Moisture-resistant heaters (anti-moisture device)
Reliable electronic system
Intelligent block protection
Manual / automatic clutch switching
Remote control settings
Integrated local control unit
Mounting base according to ISO5210
IP68 Enclosure
1. Motor ofAOX-M series remote control motorized multi turn actuator
Specially designed high starting torque motor, can frequent open the valve from fully closed position. In addition to the three-phase AC motors, single-phase AC are also suitable for AOX-M series actuators.
2. Different control options meet your specific requirement.
AOX-M series remote control motorized multi turn actuatorcan be combined with various controls from simple On/off and intelligent modulating control or fieldbus interface.
Model |
Output torque |
Speed |
Maxshaft diameter |
Power |
Rated current(A)50HZ |
Flange |
Weight |
three phases |
|||||||
N·m |
RPM |
mm |
W |
380V |
ISO5210 |
Kg |
|
AOX-M-007 |
70 |
45 |
Φ28 |
400 |
2.42 |
F10 |
32 |
70 |
90 |
400 |
2.95 |
||||
AOX-M-010 |
120 |
35 |
Φ28 |
600 |
2.25 |
F10 |
38 |
120 |
70 |
600 |
3.18 |
||||
120 |
105 |
800 |
5.15 |
||||
AOX-M-020 |
300 |
34 |
Φ40 |
1100 |
4.50 |
F14 |
68 |
300 |
67 |
1100 |
6.85 |
||||
AOX-M-050 |
450 |
34 |
Φ40 |
1100 |
9.58 |
F14 |
70 |
450 |
67 |
1500 |
14.80 |
||||
AOX-M-060 |
600 |
34 |
Φ55 |
3000 |
10.89 |
F16 |
103 |
600 |
67 |
4000 |
16.50 |
||||
AOX-M-080 |
800 |
34 |
Φ55 |
3000 |
12.43 |
F16 |
103 |
800 |
67 |
4000 |
23.50 |
||||
AOX-M-100 |
1000 |
34 |
Φ55 |
4000 |
30.20 |
F16 |
103 |
Shell |
Enclosure:IP67(IP68 optional),NEMA4 and 6 |
|
Power |
Standard:380V AC/3ph Optional:110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10% |
|
Motor |
Asynchronous motor |
|
Limit switch |
1×Open/ Close, SPDT,250V AC 10A(on/off model) |
|
Auxiliary limit switch |
1×Open/ Close, SPDT,250V AC 10A(on/off model) |
|
Torque switch |
1×Open/ Close, SPDT,250V AC 10A |
|
Operating temperature |
Internal-placed thermal protection,Open 120℃ ±5℃ /Close 97℃ ±5℃ |
|
Manual operation |
Declutching mechanism,with handwheel operation |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Space heater |
30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted) |
|
Conduit entry |
Double seal 3×(PT3/4”、PT1”、PT1-1/2”optional) |
|
Ambient temperature |
-25℃~+70℃(-30℃、-40℃、-60℃ optional) |
|
Lubrication |
Special oil for 00 actuators |
|
Material |
Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate |
|
Ambient humidity |
Max 90%RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
External coating |
Dry powder, epoxy polyester,high anti-corrosion |
|
Overload protection |
Torque peak overload protection |
|
Display screen |
LED display (smart regulation type) |
|
Setting mode |
Non-intrusive setting (without opening the cover set type) |
|
Electrically |
Integrated control unit with a non-invasive rotary switch |
NO. |
Option cheme |
Optional |
1 |
Explosion-proof actuator (Exd Ⅱ CT4) |
AOX-M series |
2 |
Water-proof actuator (IP68,10M,250HR) |
AOX-M series |
3 |
High temperature resistance actuator (-10℃~+100℃) |
AOX-M series |
4 |
Low temperature resistance actuator (-60℃~+30℃) |
AOX-M series |
5 |
Special output drive |
AOX-M series |
Before working
1.AOX-M series remote control motorized multi turn actuatorand valves have been properly installed and connected.
2. The fixing screws, connecting parts and electrical connection parts of the location are tightened.
3. Grounding and equipotential bonding are properly implemented.
4. The electrical connection is correct.
5. The source supply voltage must always be on the nameplate and moving or moving parts.
6.AOX-M series remote control motorized multi turn actuatorand valves are intact.
7. The ambient temperature is within the working limits of the electric actuator.
We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.
Q:Do you have any certificate for yourAOX-M series remote control motorized multi turn actuator?
A:Now we have got CE,ATEX,GOST,SIL,EAC certificate for our products.
Q: Can we call on skype?
A: Yes, we can. What's more, there are many optional ways we can talk easily, such as e-mail,Wechat, etc.
Q:Can I visit your company if we are interested in yourAOX-M series remote control motorized multi turn actuator?
A:Of course,Your visit is our pleasure.