AOX-Q series non-intrusive setting part turn electric actuator is applied to the application required proportional control, and produce torque with range of 50N.m~ 6000N.m.Drived by 380V/220V/110VAC or 24V/110VDC power, inputs 4-20mA or 0-10VDC control signal, moves valve to the right position, and achieves to automatic control, the maximum output torque is 5000Nm.We are committed to providing our distributors and customers with the best service.
Torque range:50~6000N.m
Ambient temperature:-20℃~+70℃ (-40℃ -60℃ is optional)
Control method:On and off / modulating type/ Intelligent type
Weight:7.5 KGS~83 KGS
Protection:IP67, (IP68 optional) ExdⅡ CT5
Local Control Unit: Local control knob of open/close/stop, switch knob of close control remote control/prohibit control(non-intrusive)
Display Mode: LCD, indication of opening(0-100%) and open/close fault
Control Mode: On-off signal control, Modulating (proportional regulation) control, Fieldbus Control etc.
Type of On-off Signal: Contact signal. Pulse signal
Type of Modulating Signal: 0-10V, 2-10V, 4-20mA, etc.
Type of Field-bus Signal: Modbus-RTU, Profibus-DP, etc.
Local Controller: AOX remote control(Optional)
1. Wide range of voltage available for AOX-Q series non-intrusive setting part turn electric actuator
2. Indicator sustained by spring
- Direction of visual indicator is set by factory.
- In case of changing its direction,just grip the indicator plate and change the position.
- Spring beneath indicator plate sustins the set position unchanged.
- No need to loose screw and tight it again at all.
3. Non-intrusive settings: AOX-Q series non-intrusive setting part turn electric actuator settings and diagnostics are all done with the remote control and magnetic knobs, using infrared light through the sealed display window. All settings and diagnostics of the actuator can be made without opening the electrical cover on site and exposing the internal control circuit. The effective dialogue distance between the setter and the window is 1-1.5 meters.
Model |
Max Output Torque |
60/50Hz Operating Time |
Max Drive Shaft Size |
Power |
Rated Current(A) |
Hand wheel Revolution |
Weight |
|||
single phase |
three phases |
|||||||||
N·M |
90° |
mm |
W |
110V |
220V |
380V |
440V |
N |
Kg |
|
AOX-Q-005 |
50 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
AOX-Q-008 |
80 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
AOX-Q-010 |
100 |
18/22 |
Φ20 |
20 |
1.10/0.95 |
0.55/0.54 |
0.3/0.3 |
N/A |
10 |
7.5 |
AOX-Q-015 |
150 |
21/25 |
Φ20 |
40 |
1.65/1.67 |
0.88/0.84 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
AOX-Q-020 |
200 |
21/25 |
Φ20 |
40 |
1.67/1.67 |
0.89/0.85 |
0.31/0.31 |
0.30/0.31 |
11 |
17.3 |
AOX-Q-030 |
300 |
26/31 |
Φ32 |
90 |
1.85/1.86 |
0.92/0.92 |
0.35/0.35 |
0.34/0.34 |
13.5 |
22 |
AOX-Q-050 |
500 |
26/31 |
Φ32 |
120 |
3.60/3.62 |
1.55/1.58 |
0.59/0.59 |
0.58/0.58 |
13.5 |
23 |
AOX-Q-060 |
600 |
26/31 |
Φ32 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
13.5 |
23 |
AOX-Q-080 |
800 |
31/37 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
16.5 |
29 |
AOX-Q-120 |
1200 |
31/37 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
16.5 |
29 |
AOX-Q-150 |
1500 |
78/93 |
Φ40 |
120 |
3.65/3.62 |
1.60/2.20 |
0.60/0.59 |
0.59/0.58 |
40.5 |
77 |
AOX-Q-200 |
2000 |
93/112 |
Φ40 |
180 |
4.10/4.10 |
2.15/2.20 |
0.85/0.85 |
0.79/0.79 |
49.5 |
83 |
AOX-Q-300 |
3000 |
93/112 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
49.5 |
83 |
AOX-Q-400 |
4000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
AOX-Q-500 |
5000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
AOX-Q-600 |
6000 |
155/185 |
Φ40 |
180 |
4.20/4.10 |
2.35/2.30 |
0.87/0.87 |
0.81/0.81 |
82.5 |
83 |
Shell |
Enclosure :IP67,NEMA4, Exd II CT5 |
|
Power |
Standard:220VAC/1ph Optional:110VAC/1ph, 380V/440V/3ph,50/60Hz, ±10% 24VDC/110VDC/220VDC |
|
Motor |
Asynchronous motor |
|
Limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Auxiliary limit switch |
2×Open/ Close, SPDT,250VAC 10A |
|
Torque switch |
Close/Open, each 1, SPDT,250VAC 10A |
Except AOX-Q-005/008/010 |
Travel |
90°±10° |
0°~270° |
Fail safe/ |
Internal-placed thermal protection, Open 120℃ ±5℃/Close 97℃ ± 5℃ |
|
Indicator |
Continuous position indicator |
|
Manual operate |
Declutching mechanism, operate by handwheel |
|
Self-locking device |
Self-locking by worm and worm gear |
|
Mechanical limit |
2 × external adjustable stopper |
|
Space heater |
30W(110V/220VAC) |
|
Conduit entry |
2 × PT 3/4” |
|
Ambient temperature |
-25℃~+70℃(-30℃、-40℃、-60℃ optional) |
|
Lubrication |
Grease moly(EP type) |
|
Material |
Steel, Aluminum alloy, Aluminum bronze,Polycarbonate |
|
Ambient humidity |
Max 90%RH |
Non-Condensing |
Anti-vibration |
X Y Z 10g,0.2~34 Hz,30 minutes |
|
External coating |
Dry powder, Epoxy polyester,high anti-corrosion |
No. |
Option scheme |
Remark |
1 |
Explosion-proof actuator(Exd ⅡCT5) |
AOX-Q series |
2 |
Potentiometer unit(1K-10K) |
AOX-Q series |
3 |
Proportion control unit (control signal 4-20mA DC/1-5V/1-10V) |
AOX-Q series |
4 |
Local control units (local control open/stop/close optional switch, local/remote switch) |
AOX-Q series |
5 |
Travel 120°, 180°,270° |
AOX-Q series |
6 |
Direct current motor(24VDC) |
AOX-Q series |
7 |
Water-proof actuator (IP68,10M,250HR) |
AOX-Q series |
8 |
Reverse electromagnetic control and transmission integrated motor starter |
AOX-Q series |
9 |
Torque switch (SPDT× 2 250VAC 10A) |
Except AOX-Q-005/008/010 |
10 |
Electric current position sensor (output 4-20mA DC) |
AOX-Q series |
11 |
High temperature resistance actuator (-10℃~+100℃) |
AOX-Q series |
12 |
Low temperature resistance actuator (-60℃~+30℃) |
AOX-Q series |
13 |
Low speed actuator |
AOX-Q series |
14 |
Bus-control unit |
AOX-Q series |
With the value placed on domestically developed products and respect for intellectual property, R&D team of AOX has totally obtained 96 national patents. To maintain our status as leader of this industry. we will continue to focus on innovation and implement highest quality standards and lead the high quality AOX-Q series non-intrusive setting part turn electric actuator.
Q : How long is the sample time of the slipper?
A :The regular AOX-Q series non-intrusive setting part turn electric actuator we all have in stock, if it is specially customized it takes about 3-5 days.
Q: Do you give any discount for AOX-Q series non-intrusive setting part turn electric actuator ?
A:I'll surely try my best to help you get those by the best price and good service at the same time.
Q: Can we call on skype?
A: Yes, we can. What's more, there are many optional ways we can talk easily, such as e-mail,Wechat, etc.