Intelligent motorized multi turn actuator

AOX-M series intelligent motorized multi turn actuator is applied in controlling various valves and other similar products, include butterfly valve, ball valve, gate valve, control valve and etc.Double sealed structure of the wiring chamber. The internal electrical devices are guaranteed to be in a perfectly sealed protection when the actuator is performing on-site installation and debugging.AOX supply the best quality AOX-M series intelligent motorized multi turn actuator with high technology and high performance.We are committed to providing good service and support to all of our clients around the world.

Send Inquiry

Product Description

Features

Torque Range: 40 - 1000 Nm Direct Output

Speed: 34 35 45 67 70 90 (rpm)

Explosion-proof level: Exd IIC T5 design

Connection size:ISO5210(Thrust torque type)and JB2920(Three claw type)

Working System:On-off Type: S2 15 min, no more than 600 times per hour start.

Modulating Type: S4 50 %, up to 600 triggers per hour

Dead Zone:≤2%

Time Lag:N/A

Limit and torque sensing

Absolute encoder precision detection valve position

Manual / automatic clutch switching

Local control inching / automatic holding selection

ESD beyond protection

Two-wire control protection

Three-phase power phase sequence protection

1. Manual operation for AOX-M series intelligent motorized multi turn actuator

- In the commissioning or in an emergency the actuator can be operated by handwheel.

- By operating the red button to disconnected the actuator and motor and start manual operation.Because the self-locking worm gear between the motor and the operating shaft are separated, it’s very easy to turn to manual operation even if the actuator is running at maximum torque.

- After starting the motor, automatically breaks away from manual operation, when the motor is operating the hand wheel does not work.

2. Valve mounting standard

Installation flange of AOX-M series intelligent motorized multi turn actuator is according to EN ISO5210 or DIN3210 standard. Various types of output drive types to choose, suitable for different types of valves.

3. Motor protection.

In order to protect the motor against overheating, there are two series of thermal switch installed in the three-phase motor or single-phase motor winding inside. They are involved in the control circuit to prevent damage to the motor because of winding overheating.

Performance Parmeter

Model	Output torque	Speed	Maxshaft diameter	Power	Rated current（A）50HZ	Flange	Weight
					three phases
	N·m	RPM	mm	W	380V	ISO5210	Kg
AOX-M-007	70	45	Φ28	400	2.42	F10	32
	70	90		400	2.95
AOX-M-010	120	35	Φ28	600	2.25	F10	38
	120	70		600	3.18
	120	105		800	5.15
AOX-M-020	300	34	Φ40	1100	4.50	F14	68
	300	67		1100	6.85
AOX-M-050	450	34	Φ40	1100	9.58	F14	70
	450	67		1500	14.80
AOX-M-060	600	34	Φ55	3000	10.89	F16	103
	600	67		4000	16.50
AOX-M-080	800	34	Φ55	3000	12.43	F16	103
	800	67		4000	23.50
AOX-M-100	1000	34	Φ55	4000	30.20	F16	103

Standard Specification

Shell	Enclosure:IP67（IP68 optional）,NEMA4 and 6
Power	Standard：380V AC/3ph Optional：110/220V AC/1ph,440V AC/3ph, 50/60Hz, ±10%
Motor	Asynchronous motor
Limit switch	1×Open/ Close, SPDT,250V AC 10A（on/off model）
Auxiliary limit switch	1×Open/ Close, SPDT,250V AC 10A（on/off model）
Torque switch	1×Open/ Close, SPDT,250V AC 10A
Operating temperature	Internal-placed thermal protection，Open 120℃ ±5℃ /Close 97℃ ±5℃
Manual operation	Declutching mechanism,with handwheel operation
Self-locking device	Self-locking by worm and worm gear
Space heater	30W (110/220V AC) Condensation preventing (according to conditions, can be adjusted)
Conduit entry	Double seal 3×（PT3/4”、PT1”、PT1-1/2”optional）
Ambient temperature	-25℃～+70℃（-30℃、-40℃、-60℃ optional）
Lubrication	Special oil for 00 actuators
Material	Ductile iron, high-strength aluminum alloys, steel, aluminum bronze, polycarbonate
Ambient humidity	Max 90％RH	Non-Condensing
Anti-vibration	X Y Z 10g,0.2～34 Hz,30 minutes
External coating	Dry powder, epoxy polyester,high anti-corrosion
Overload protection	Torque peak overload protection
Display screen	LED display (smart regulation type)
Setting mode	Non-intrusive setting (without opening the cover set type)
Electrically	Integrated control unit with a non-invasive rotary switch

Option Specification

NO.	Option cheme	Optional
1	Explosion-proof actuator (Exd Ⅱ CT4)	AOX-M series
2	Water-proof actuator (IP68,10M,250HR)	AOX-M series
3	High temperature resistance actuator (-10℃~+100℃)	AOX-M series
4	Low temperature resistance actuator (-60℃～+30℃)	AOX-M series
5	Special output drive	AOX-M series

Packaging

In ensuring product quality at the same time, we also pay attention to the details of control, especially product packaging, fine packaging can effectively ensure the appearance of AOX-M series intelligent motorized multi turn actuator and give customers a good experience.

Manufaturing process

Our Patents

The company invested a large amount of funds in technology development for technology research and new AOX-M series intelligent motorized multi turn actuator development. There are 89 patents in total, including 3 invention patents, 27 utility model patents, 49 design patents, and 4 invention patents. 2 utility model patents.

Our Certificate