Industrial spring return pneumatic actuator

Innovations and patented solutions for a universal drive shaft
Fully compliance with all the latest international standards
Extensive products range allows best versatility at lower price
Wide range options in technical specification and highly cost-effective
Air supply pressure:Double acting: 2-8Bar;Spring return: 2-8Bar
Lubrication:Under normal operating condition,need not accrete lubricant
Application:Either indoor or outdoor
Highest pressure:The maximum input pressure is 8 Bar
ACCESSORIES AVAILABLE
• Different Square reductions suitable for drive shaft
• Centering rings for all sizes
• Brackets
• Limit switch boxes
• Proximity switches

1. Travel Stops.
The two sole adjusting screws at the side surface of the AOX-P series industrial spring return pneumatic actuator which has been already installed on the valve could make the adjustment of location of the valve opening and closing more convenient and accurate. 
2. Indicator for AOX-P series industrial spring return pneumatic actuator.
Multifunctional location indicator, in field visible indicator and standard socket in accordance to VDI/VDE3845、NAMUR could be installed and export all the accessories .
3. Top/side mounting standard.
The air supply interface is built according to NUMAR standard. To the interface the NUMAR solenoid valve can be installed directly.
4. Selected high quality bearings and seals that provide a wide operating temperature range, low friction, and high cycle life.

The suggested safety factor for AOX-P series industrial spring return pneumatic actuator under normal working conditions is 30-50%
Example:
The torque needed by valve =80N.m
The torque consider safety factor(1+30%)=104N.m
Air supply=5Bar
According to the tale of spring return actuator’s output,
we find output torque of SC00300 is:
Air stroke 0° =172N.m
Air stroke 90° =112N.m
Spring stroke 90°=165N.m
Spring stroke 0°=105N.m
All the output torque is larger than we needed.
Attention:
During the restoration, the spring return actuators' output torque will not be affected by the inputing air from the Port B.On the contrary ,it will help the restoration of springs.

 
1. We are manufacture for more than 20 years. Our company was founded in 1997,We are specialize in R&D, designing, and producing of AOX-P series industrial spring return pneumatic actuator.
 
2. Have batch code for each relay, Has a good traceability.
 

3. We have a strict management system for suppliers and raw materials，We usually choose best quality material for our AOX-P series industrial spring return pneumatic actuator.

We are always ready for providing the sample and producing some small orders, in order to meet the business well. We are always ready to hear from you.

Q : How long is the sample time of the slipper? 
A :The regular AOX-P series industrial spring return pneumatic actuator we all have in stock, if it is specially customized it takes about 3-5 days.

Q: Can we have our logo or comany name to be printed on your AOX-P series industrial spring return pneumatic actuator or package?
A :Sure. Your Logo could be printed on your products by sticker.

Q: How to order AOX-P series industrial spring return pneumatic actuator?
A :Pease send us your purchase order by Email , or we can make you proforma invoice under your request.We need to know the following information for your order before sending you PI.
1) Product information Quantity, Specfcaton(Size, Material,Technological if needed and Packing requirements etc)
2) Delivery time required
3) Shipping information Company name, Street address,Phone &fax number, Destination seaport
4) Forwarders contact details if there's any in China.